Executive Tank Clean

Our Executive Clean is for tanks requiring an extensive and deep cleaning due to excessive fouling on both the bottom and sides. Every part of your tank is scrubbed or water blasted, sanitised, and restored to optimal condition. 

For safety and efficiency, this process requires two operators on-site, adhering to strict health and safety regulations. Typically, we ask clients to have a phone chat with one of our operators before booking an Executive Clean. Often, due to our efficient process, a Premium Clean is all that is required. 

The Executive Clean starts by vacuuming the bottom sludge and sediment to waste, similar to our other services. We then drain the entire tank completely to allow for a more intensive cleaning. We bring our own power and water on-site. A member of our team enters the tank and water blasts or brush washes the tank's bottom and sides, thoroughly removing any stubborn grime buildup or biofilm. 

After scrubbing, we remove the final debris and the last few litres of silty water and vacuum the tank and sanitise all surfaces with ULV fog to ensure the tank is free from bacteria and viruses above and below the water. 

Depending on the size and condition of the tank, this process generally takes two hours for a standard-sized tank. 

As the tank is completely drained for this service, replacement water will need to be purchased, which can be arranged by either the client or our team. 

Conditions apply to our Executive Clean due to tank type and groundwater levels.

• Price is $495 +gst per tank +travel

• Travel is calculated upon receiving your address, generally $60 to $90 as 2 vehicles are required on-site